|
CHEMICAL / ABRASION RESISTANT |
|
Nylon Nylon coatings bring wear, abrasion, impact and corrosion resistance to steel, aluminum and magnesium alloys. Multiple colors are available for both industrial and consumer applications. |
|
Foot Board |
|
Epoxy Epoxy coatings, applied by electrostatic spray deposition , produce a uniform coating thickness and can decorate and protect almost any substrate that can withstand temperatures of 300 ° F to 425 ° F. Special formulations can be developed for color, gloss or texture requirements. |
|
Light Pole Base |
|
E-mail info@russprodco.com Capabilities Home Contact us at 1 - 800 - 225 - 2482 |
|
Kynar ® Kynar ® (Polyvinylidene fluoride) imparts superior chemical, abrasion and impact resistance to substrates. With a tensile strength of 575 Kg/cm2 (8000 psi) and a high dielectric constant, Kynar ® is the lubricant of choice for many applications. The use temperature range is from –40 ° F to 300 ° F. It is nontoxic and conforms to FDA requirements for articles intended for use in contact with food. It shows excellent stability to UV and gamma radiation. |
|
Mixer Shaft |
|
Halar ® Halar ® fluoropolymer is a thermoplastic copolymer of ethylene and chlorotrifluoroethylene that offers excellent chemical and abrasion resistance, low permeability, good electrical properties, and broad use temperature range (cryogenic to 300° F). Applied by electrostatic coating techniques, Halar ® is the preferred coating for use in the chemical handling industry, being unaffected by substances such as strong mineral and oxidizing acids, alkalies, metal etchants, liquid oxygen, nitrogen tetroxide and all organic solvents except hot amines. Halar ® is attacked by metallic sodium and potassium. Halar ® fluoropolymer is not wetted by water but oils and hydrocarbons readily spread on its surface. |
|
Teflon ® |
|
Teflon ® coatings provide acid, wear and corrosion resistance to many types of components. Its nonstick, easy-to-clean properties prevent residue buildup and produce higher performance parts. Teflon ® coatings spray on like paint and bake to a tough, inert finish and have gained acceptance in a wide range of industrial applications. |
|
Properties of Teflon ® Low coefficient of friction (0.02—0.05) Chemical inertness Operating stability –270° C to 230° C Excellent dielectric stability Low dissipation factor High surface resistivity Non stick / Release / Non wetting |
|
Pump Impeller |
|
Pump Housing |
|
Chemical Mixer |
|
Dykor ™ |
|
Dykor™ coatings are based on high order thermoplastic fluoropolymer (Polyvinylidene—PVF2 ) resins. Dykor™ coating materials are excellent chemical barriers and are resistant to most acids, bases, oxidizing agents and halogens. Dykor ™ coatings will not chip, crack, or peel even when mechanically abused. The useful temperature range is - 80° F to 300° F. When pigmented, Dykor™ retains its color and gloss for periods of 20 years or more even in chemical laden atmospheres. |
|
Autoclave Basket Bracket |