HOME CAPABILITIES CUSTOMER SERVICE SURFACE PREPARATION
AEROSOL LUBRICANTS
MOLY
PTFE
ANOTIC COATINGS
ANODIZING
HARD ANODIZING
CHEMICAL/ABRASION
RESISTANT
CONVERSION
COOKWARE
DRY FILM LUBRICANTS
DURILLIUM B
DURILLUIM N
EXCALIBUR
FOOD EQUIPMENT
MEDICAL
PAINT
PHOSPHATING
PLATING
POLYURETHANE
POWDER
PVC
RELEASE
RUBBER
SPECIALTY
URETHANE
VINYL
WS 2
| POWDER COATINGS |
| HALAR® | |
| Halar®fluoropolymer is a thermoplastic copolymer of ethylene and chlorotri- fluoroethylene that offers excellent chemical and abrasion resistance, low permeability, good electrical properties, and broad use temperature range (cryogenic to 300° F). Applied by electrostatic coating techniques, Halar® is the preferred coating for use in the chemical handling industry, being unaffected by substances such as strong mineral and oxidizing acids, alkalies, metal etchants, liquid oxygen, nitrogen tetroxide, and all organic solvents except hot amines. Halar® is attacked by metallic sodium and potassium. Halar® fluropolymer is not wetted by water, but oils and hydrocarbons readily spread on its surface. |
 |
| Mixer Shaft |
| KYNAR® |
| Kynar® (Polyvinylidene fluoride) imparts superior chemical, abrasion and impact resistance to substrates. With a tensile strength of 575 kg/cm2 (8000 psi) and a high dielectric constant, Kynar® is the lubricant of choice for many applications. The use temperature range is from -40° F to 300° F. It is nontoxic and conforms to FDA requirements for articles intended for use in contact with food. It shows excellent stability to UV and gamma radiation. |
| NYLON | EPOXY |
| Nylon coatings bring wear, abrasion, impact and corrosion resistance to steel, aluminum and magnesium alloys. Multiple colors are available for both industrial and consumer applications. | Epoxy coatings applied by electrostatic spray deposition, produce a uniform coating thickness and can decorate and protect almost any substrate that can withstand temperatures of 300° F to 425° F. Special formulations can be developed for color, glass or texture requirements. |
 |
  |
| Foot Board | Knobs | Light Pole Base |