AEROSOL LUBRICANTS
MOLY
PTFE
ANODIC COATINGS
ANODIZING
HARD
ANODIZING
CHEMICAL/ABRASION
RESISTANT
CONVERSION
COOKWARE
DRY FILM
LUBRICANTS
DURILLIUM B
DURILLUIM N
EXCALIBUR
FOOD EQUIPMENT
MEDICAL
PAINT
PHOSPHATING
PLATING
POLYURETHANE
POWDER
PVC
RELEASE
RUBBER
SPECIALTY
URETHANE
VINYL
WS 2
|
| "FAST TECHNOLOGY" PROVIDES CONSISTENT HIGH QUALITY
TO KEEP YOU COMPETITIVE |
| WS2 |
|
| Tungsten Disulfide (WS2) is a solid lubricant that does
not depend on absorption for its lubricating qualities. Offering exceptional
advantages to the plastics industry, WS2 is used to solve problems
concerning mold release and flow. For more information see
WS2 |
 |
| EMRALON® |
|
| This flexible, water based coating is a resin-bonded
PTFE lubricant that prevents binding, seizing, sticking and tearing of rubber and
plastic parts during production and assembly. It protects substrates from
oil, alcohol, gasoline, dirt and abrasive materials. |
 |
| XYLAN® |
| Xylan® has excellent adhesion to a variety of materials including
but not limited to steel, brass, aluminum, copper, ceramic, wood and fiberglass. It is wear, corrosion
(salt water, road chemicals, etc.) and weather resistant. It exhibits a wide operating
temperature range of -240° F to 550° F. With a low coefficient of friction of 0.02, it has remarkable
release properties. An extensive color range is available to personalize the product. |
 |
 |
| Cardboard Forming Device |
Nuts and Bolts |
| EVERLUBE® |
PTFE |
| Everlube® is effective over a wide temperature range
(-420° F to 2000° F) where grease and oil lubricants are ineffective. Everlube® meets
many specifications including MIL-L-46010, MIL-L-81329, MIL-L-25504, MIL-L-22273 and
MIL-L-8937 a, b and c. It is efficacious to apply Everlube® on valves,
cams, rack and pinion gears, threaded fasteners, slides, rollers, latches and a host
of load bearing surfaces. |
 |
 |
Door Hardware
Many items can be bulk
processed for cost effectiveness. |
| Tugboat Engine Component |
|
| Permalon coatings are a proprietary series of
dry film lubricants containing Molybdenum Disulfide or PTFE. They are all purpose coatings that
have a large range of applications. They are noted for appearance, their ease
of cleaning, and their excellence in rubber release. For more information, see
Moly
or PTFE. |
 |
| The application of molydisulfide based solid lubricants
extends the service life of ferrous and non-ferrous components by reducing
wear effects of metal-to-metal contact. |
| MOLYKOTE® OFFERS |
MOLYKOTE® PREVENTS |
| Wear Resistance |
Sticking |
| High Load Tolerance |
Chattering |
| Corrosion Protection |
Galling |
| Oil Resistance |
Seizing |
| Resistance to Fuels/lubricants |
Overheating |
| Low Coefficient of Friction |
|
| Molydag™ is a performance lubricant that is made
up of Molybdenum disulfide and other lubricating solids. It can be applied
to a variety of substrates including steel, stainless steel, aluminum and copper alloys.
The performance obtained by a coating of Molydag™ depends on the care given to
substrate preparation. Recommended substrate preparations include: grit or vapor blasting, degreasing, chemical treatment, solvent
cleaning, alodining or anodizing. When cured, the
coating conforms to Military Specification MIL-L-8937-D. |
| Coefficient of Friction: |
0.14 static |
| Color: |
Dark Gray |
| Binder: |
Epoxy Resin |
| Continuous Service Temp: |
275° F |
| Intermittent Service Temp: |
300° F |
| Falex Endurance Life: |
250 Minutes Minimum |
| Falex MLCC: |
2500 Pounds Minimum |
| Corrosion Test (ASTM D2649): |
500 Hours |
| Fluid Resistance: |
120 Hours |
|
